- Overview
- Built in 1978 by J & M Carlson Ltd.
- Location: Mid Vancouver Island, BC
- 38'10" x 12'6" x 4'7" with 6'4" headroom
- Power
- Engine: GM 671, 180 hp diesel
- Engine hours: Unknown
- Reduction gear: 509 with PTO
- Ratio: 2.5:1
- Propeller: 3 blade
- Cruising speed: 7.5 knots
- Full speed: 9 knots
- Fuel tanks: 4, aluminum, 600 gallons total capacity
- Engine alarms, gauges and watch alarm
- Keel cooled
- Hydraulic pumps: 620 Eaton, flow sensing
- Bilge pumps: 2" and 3" Pacer, 2" Jabsco, 110 volt 1.5" pump and assorted Rule pumps
- Structural
- All fiberglass construction
- Poles: Aluminum
- Mast: Aluminum
- Chocks
- Wings: Bulbous bow
- Stabilizers
- Zincs and anti-fouling: 2022
- Holds: Foam and fiberglass - 1 main and 3 live
- Holds capacity: 18,000 - 20,000 halibut / 8,000 live lingcod / 3,000 live rockfish
- Anchor: Bruce
- Anchor winches: Hydraulic
- Drums: Halibut / gillnet with 5 piston drive
- Drum spooler: Hydraulic
- Electronics
- GPS: Furuno
- VHF's: 2
- Computer: Nobeltec
- Radar: Furuno NavNet
- Sounder: Furuno NavNet
- Plotter: Nobeltec
- Autopilot: ComNav 2001 with remote
- Spotlight
- Compass
- Barometer
- Inverter
- Steering stations: 3
- Controls: Kobelt electronic with manual backup
- Accommodations
- Sleeps: 4
- Stove: Dickinson
- Fridge / freezer
- Galley sink: Double stainless steel
- Water tanks: 2, aluminum, 150 gallons total capacity
- Head
- Shower
- Hot water
- Heating: Oil
- New in 2021
- Fiberglass stern tube and cutlass bearings
- Pinto bearing on rudder
- Fuel and water lines to stern
- Steering lines to stern (stainless)
- Plumbing to hatch and live tanks for pumping in or out
- Electrical and conduit to stern
- Foam, fiberglass and gel coat to main fish hold and live tanks
- Propeller
|
